3000W 3500K LED Grow Light Sunlike Full Spectrum Indoor Plants Hydroponic Lamp. Max Yield: 2.0 Lbs/two lights. Power Consumption: 240W (2.1A110VAC/0.5A240VAC). LEDs: 576 pcs (360pcs 3500K white LEDs, 200pcs Wideband Full RED LEDs, 16pcs UV LEDs).Total chip area: 0.887 square in. Light VEG B:GY:R:FR : 17%:43%:36%:2%.
Light Flower B:GY:R:FR : 12%:30%:48%:10%. Light Best For: flowering and fruiting plants during growth and flower stage. Light Mounting Height: 12-20in above canopy. /s (stage: h=mounting height A=canopy coverage).
LED chip soldering pad temperature: 70. Power Driver: aluminum housing and Thermal sealant.
23.6(L)x14.2(W)X4(H). PS FULL SPECTRUM: We use 3500k white light as seedling and VEG spectrum (B:GY:R:FR=15%:45%:35%:2%), this spectrum is same as CMH/CDM on RGYB rate. Flower Booster Switch ON, this spectrum(B:GY:R:FR=12%:30%:48%:8%) get more red and far-red light , this spectrum is same as HPS on RGYB rate.Professional growers know that CMHCDM is great at the seedling. Stage, and HPS is able to ensure a very good harvest. Our light get 2.7. Mol/J PPF efficacy even it. And CMHCDM is 1.6.
Mol/J, DE HPS is only 1.8. We use SANAN 2235 dual chip , it. S chip area is almost twice the size of.
LM301B, and consume only 240W with 576 LEDs , and we use only 1% light decay nano-waterproof coating. All of these will let grower get 40% higher yield compare to old LED grow light. We set up some grow tents in our factory , we test our lights with p. Using CMH and DE HPS to grow together , constantly adjust spectrum and efficacy with our led light , try to design best led grow light.
FOOTPRINT : In veg stage , 4X4ft just need 2pcs this lights , h. In Flower stage, 4X4ft need 2-3pcs this lights , hanging 20in from the plant, and the harvest will very cost to best 1000W HPS. It must be noted that if you want to get a good harvest, try to keep your.
Specially in winter, because the heat of LED light is low. Power drive is the core guarantee for long-term reliable operation of LED plant growth lamps.With many years of experience in LED power supply development, we know that the control device is in a low temperature and moisture proof state. It is a guarantee for stable and long life of the LED power supply, and it is also a guarantee to avoid fire when the power supply fails. Aluminum shell filling thermal adhesive is our standard for plant lamp power supply, which can meet the requirements of high humidity, high safety requirements and long working time. We will provide you with completely satisfing reply. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world. We promise: customer satisfy is the eternal pursue of corporation. We strive to provide the best product and service for our customers. Monday to Friday 8:00 A.
All the message will be responded within 12-24 hours. Specifications: PPF: 620 mol/s Efficacy:2.7 mol/J Max Yield: 2.0 Lbs/two lights Power Consumption: 240W (2.1A110VAC/0.5A240VAC) LEDs Watt3000W LEDs: 576 pcs (360pcs 3500K white LEDs, 200pcs Wideband Full RED LEDs, 16pcs UV LEDs) LED Chip: SANAN 22352 Total chip area: 0.887 square in Input power: 100-240VAC 50/60Hz Power Factor: >0.9 Light Spectrum: 380nm800nm full spectrum including 450nm/660nm/730nm Light VEG B:GY:R:FR : 17%:43%:36%:2% Light Flower B:GY:R:FR : 12%:30%:48%:10% Light Best For: flowering and fruiting plants during growth and flower stage Light Mounting Height: 12-20in above canopy Light PPFD (mol/ m²/s) (stage: h=mounting height A=canopy coverage): 430 mol/m²/s (Vegetative: h=25in A=3X3ft) 590 mol /m²/s (Flower: h=20in A=4X2ft) Light Operating.
The item "3000W LED Grow Light Full Spectrum For Indoor Plants Hydroponic Lamp 3500K White" is in sale since Monday, October 15, 2018. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Hydroponics & Seed Starting\Grow Light Kits".The seller is "ever_fortunate" and is located in Rowland Heights, California. This item can be shipped to United States.