Lighting solution for your home or apartment? Plant stress from excessive heat? The life of your CARBON FILTER? We couldn't find the stealth lighting solution we wanted to lower temperatures in our grow room.So we decided to build our own! After a few years of testing different designs producing EXCELLENT results, weve decided to offer these lights to our whiteWIDOW. Our latest design allows you to easily.
As many lights as you want. To ensure the LEDs can never overheat. Want remote 4G/Wifi monitoring and control? SONOFF WIFI/4G DIGITAL TEMPERATURE SENSOR. To control your lights with the free eWelink Android or Apple app.We also have a complete cooling solution for this LED light bar. WHY WOULD YOU WANT A WATER COOLED LED LIGHT? Heat is a byproduct of LEDs - no matter how efficient they are. ALL high power LEDs need to be cooled or they will burn up in a matter of minutes. A typical LED grow light has its LEDs attached to a large aluminum heatsink and high speed fans blow large volumes of air over the heatsink to keep it cool.
Just about every high power grow light works this way. The problem is that AIR is not an efficient medium to remove heat. Massive amounts are required to remove the heat from the aluminum. This is why noisy high speed fans are required.
The higher the power of the grow light, the more heat it generates, and the more heatsink area and air required to keep it cool. It is a vicious cycle!
An air cooled LED grow light is just like putting a heater in your grow box. You are circulating the SAME AIR that your plants are utilizing with extremely hot air produced by the LEDs. This dramatically raises the temperature of your grow area! Plants like a comfortable 20-30C / 68F-86F temperature range. So your only option is to use a second high volume fan to pump/suck cool air into the box to remove all that heat your LEDs just generated!
Considering that air has interacted with your plants, it now also needs to be filtered through activated carbon to remove its smell. A WATER COOLED LED LIGHT SIMPLIFIES THINGS. We use extremely economical, yet efficient, third generation COB LEDs and thermally bond them to a special hollow aluminum water block. By circulating cool water through this water block (with a almost silent water pump) nearly all the heat generated by the LEDs is instantly transferred to the water. This hot water is then routed to the OUTSIDE of the grow box (by small PVC water lines) and into a small heat exchanger (radiator).
This radiator then transfers the heat from the water back to the air (with the help of 4 low speed fans), then the cooled water is circulated back into the system. The result is a nearly SILENT grow area, no excessive heat being generated in the grow box (stressing the plants), no high volume fans inside are required, and reduced wear and tear on your carbon filter! The savings in electricity and carbon filters alone can make up the cost of ownership!
Not to mention the peace-of-mind that comes with a nearly SILENT grow area! 6 COB leds X 50-55 watts each. 3rd generation COBs with integrated driver on board. 3500K, 6000K, Red-Blue 380-780nm, 455nm.
1 Gallon / 3.7 Liters per minute (recommended). 5-50C / 68F-104F (Lower water temps reduce grow area temps and increase water pump life). External adjustable thermal relay protection.
10 X 3.5 X 3 / 26cm X 9cm X 8cm TINY! Head over to https://. PLEASE NOTE - THESE LED LIGHT BARS REQUIRE WATER COOLING TO FUNCTION. How big of a grow space will one of these 300 watt water cooled LED grow lights accommodate? It is a standard industry recommendation to give your plants 50-75 watts per square foot.
So this light will provide more than enough light to cover a 2X2 or 2X3 grow area, possibly a 3X3 area if the area is not jam packed full. Why did you go with these specific LEDS? We tested these LEDs over the past 1.5 years and found they perform very well. We are also trying to keep the cost down!While there are much more efficient LEDS on the market (Like CREE COBs), they are exponentially more expensive! Does this light come with the water reservoir, hoses, heat exchanger, pump, and fittings? That is a separate kit. You can visit https://.
And check out the complete master kit we offer. I want to daisy chain multiple lights together for a larger grow space. Hang the light, connect a PVC tube splitter (or parallel your lights/water lines) to direct water to your additional lights, and plug it in. Once you have your pump, water lines, and radiator all setup, its only a bit extra work to add more lights to the system.
How many lights can I daisy chain? In a typical grow space / room / apartment, We recommend 4-5 light bars (max) per heat exchanger (radiator). This is mainly because beyond 4-5 light bars the radiator fans speed needs to be increased to properly cool the water. This starts to become loud (in our opinion). If you add a second radiator (and its 4 fans), you effectively double the cooling capacity.
We have actually run 16 X 300 watt lights on a single PVC waterline, pump, and 4 radiators - FOR A TOTALLY SILENT GROW AREA! The only noise came from the exhaust fan, and small oscillating fans inside the area! What are my LED options? Each LED Light bar has 6 X 50w LEDS totaling 300 watts. We highly recommend one of these 3 LED combinations.
A 6X RED-BLUE 380-780nm LEDs - (Specifically designed to provide mostly blue and red light spectrums). C 4X Red-Blue 380-780nm LEDS + 2X 3500K LEDS (Easier to see plants and provides extra yellow/green spectrum).
D 4X Red-Blue 380-780nm LEDS + 1X 3500K LED + 1 X 6000K LED. We have had excellent results from these combinations. However, we can custom build the LED light bars from these 4 COB LED options to suit your application.3500K - Warm white light. 6000K, - Cool white light. 380-780nm - RED-BLUE light only - Specifically designed for growing plants. 455nm - Blue light only (only useful for veg period). Do you have Light Spectrum maps for each kind of LED? Yes - please visit https://. Just plug the 5 foot power cord into any standard 120v AC wall outlet. How long have you been testing this design? Rocks customers around the World test these over the past 16 months.
They all have been running 12-20 hours a day growing autoflowering and photoperiod plants. We have had ZERO problems. Weve actually had customers accidently kink water lines, water pumps that have accidentally been shut off, even had pets chew holes in water lines (that were not routed properly) and the protection circuit worked perfectly.Each light shut down automatically when it reached 50C, before they could overheat and any damage could occur. Can I turn some of the lights off for less brightness?
We opted to not bother installing light switches for each individual 50W LED. We did this because we found it significantly increased the production cost of the light bar. We also found that if you require less light, you can either move the light up higher, or simply open the power/control box on top of the light bar and disconnect the LEDs wire directly in about 30 seconds. Do you have a PAR MAP? Do you have any whiteWIDOW Seed Bank reviews we can read?
Check out our reviews on Facebook. I want to add a SONOFF WIFI / 4G Controller and temperature sensor. The Sonoff box plugs into your 120v wall power outlet, and then the LED light bar plus into it.
A special temperature sensor plugs into the Sonoff box and this is epoxied onto the lightbar. You then simply download the eWelink app and you can not remotely monitor the temperature of your water cooled lightbar, set operational temperature thresholds, and program on-off cycles (timer). EACH LED LIGHT BAR IS CUSTOM MADE WHEN ORDERED. PLEASE TAKE THIS INTO CONSIDERATION. 1 - Watercooled LED Grow Light (assembled).
1 - Adjustable protection circuit (assembled). 1 - 5 foot power cord (assembled onto power/safety controller). 2 - 8 foot hangers.
1 - Coupon for 10 free autoflowering or photoperiod seeds of your choice from https://. 1 - Basic diagram + instructions.The item "WATER COOLED LED Grow Light 300w WIFI/4G Custom made by whiteWIDOW SeedBank" is in sale since Friday, November 22, 2019. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Hydroponics\Grow Lighting & Accessories\Grow Light Kits".rocks" and is located in North Vancouver, British Columbia. This item can be shipped to Canada, United States.rocks